XE Series Networkable Two Channel Professional Power Amplifiers


XE Series professional amplifiers are designed for portable and fixed installations. Four models are available: XE2500, XE4000, XE5002 and XE6000. All type have graphics LCD display and two JOGs for change system parameters. The devices have internal webserver for full remote control over standard ETHERNET. There are two possible ways to use the remote control functions: with normal internet browser (JAVA based), and with PKNC control software.

Main Features

- High output power and high efficiency
- Advanced high frequency switching technology
- Small size, low weight, ideal for touring applications
- Networkable amplifier over standard Ethernet
- AMPControl software and JAVA based control
- All functions can be accessible by remote
- Graphics LCD for easy setup and diagnostics
- Two JOG button for fast navigating
- Digital volume and input sensitivity control
- Built-in programmable limiter
- Output Peak and average Voltage,Current measuring
- Displays actual load impedance
- Embedded webserver for set&view parameters by a web browser
- Five user profiles
- Intelligent protective functions
- High frequency resonanat power supply with active PFC function
- Wide mains voltage operation range


Products Table


4 Ohms
8 Ohms
XE 2500
2 x 1300 W
2 x 700 W
XE 4000
2 x 2100 W
2 x 1300 W
XE 5002 2x 1800 W 2 x 980W
XE 6000
2 x 3650 W
2 x 1900 W

Technical Specifications

Parameter XE2500 XE4000 XE5002 New! XE6000
Power requirements
160V - 270VAC, (50-60Hz)
Max. Power Consuption 2600W 5500W 5650W 7900W
Soft starting
Power Supply
High frequency resonant includes active PFC
Mains connection
Neutrik Powercon
Working temperature range
0 - 40C
Storage temperature range
-25C - 60C
Output power @ 16 Ohms 2 x 320W
2 x 680W 2 x 490W 2 x 1000W
Output power @ 8 Ohms 2 x 700W
2 x 1300W 2 x 980W 2 x 1900W
Output power @ 4 Ohms 2 x 1300W 2 x 2100W 2 x 1800W 2 x 3650W
Output power @ 2,6 Ohms 2 x 1900W 2 x 2000W 2 x 2600W 2 x 3000W
Output power @ 2 Ohms 2 x 1500W 2 x 1800W 2 x 3200W 2 x 2200W
Minimum load impedance
2 Ohms
Frequency (+/- 3dB, 8 Ohms)
5 Hz - 20 kHz
Slew rate 50V / us 60V / us
Damping factor >400 >500 >550 >600
End Stages High Frequency semi soft switched PWM in balanced configuration
Output connections Four pole Neutrik SPEAKON (1+2+ in parallel, 1-2- in parallel
Signal to Noise ratio A-Weighted 20Hz - 20kHz
100 dB 102 dB 101dB 107 dB
Nominal sensitivity for maximum output level (balanced)
1.4V (rms) 1.7V (rms) 1.5V (rms) 1.7V (rms)
Input Impedance (Refered to ground) 10 KOhms + 10 KOhms (+/- 1%)
Input terminals Neutrik XLR
Built in Limiter Programmable limiter ( 1V / Step )
Output level meter LEDbar, status LEDs (AGR, Short, Temp, Protect, Ready)
Display Graphics LCD
Control terminals JOGS, buttons
Volume control Set by control JOG wheels or remote -95,5dB - 0dB (in 0,5 dB steps)
Input sensitivity -95,5db - 0dB (steps 0,5 dB)
Limiter settings range 10 - 100V
10 - 155V
10 - 126V 10 - 170V
User profiles 5 user profile
Protections Short circuit, Overload,Low impedance,Thermal, DC fault
Cooling Forced air cooling with regulated DC fans
Direction of air flow Front to rear
Remote control 10/100 Mbps Ethernet
Weight 8 Kgs
9 Kgs
9.1Kgs 9,5 Kgs
External dimensions
19" rack 483 x 440 x 44mm (1RU)

*For detailed installation and technical support please contact to PKN Audio or our distributors:      http://www.pknaudio.com/distributors.html 

     All content (C) 2001-2017 PKN Audio Ltd., all right reserved. All our products are made in the EU
     Product specifications might change without prior notice